Tag Archives: paddle bit

Workbench Day 31: Mounting the Leg Vise (part 3)

I made some good progress for the 20 minutes I had to work on the bench today. I used the utility knife to chamber the edges of the two locking nut/wood discs I fabricated, then polished off the wood with … Continue reading

Posted in Workbench | Tagged , , , , , | 2 Comments

Workbench Day 29: Mounting the leg vise (part 1)

Today I finally had enough of thinking and worrying about how to mount the leg vise.  After all, once I drill that big hole through the leg, there’s no going back! I got out the Black and Decker Woodwrecker and … Continue reading

Posted in Workbench | Tagged , , , , , , , | Leave a comment

Sky Fort Day 5: Planking the second floor and so much more…

Wow did we get a lot accomplished today!  I have a lot of info for anyone out there that’s going to build this set as well, so pay attention!  No, there will not be a test at the end—your test … Continue reading

Posted in Sky Fort | Tagged , , , , | Leave a comment

Workbench Day 22: Attaching the top!

I didn’t have a lot of time today, maybe an hour and a half.  So, I spent the first hour going at the top again with the #4 plane.  I made the executive decision last night to do what I … Continue reading

Posted in Workbench | Tagged , , , , , | 2 Comments